Tedea Huntleigh 1042 Single Point Load Cell

Tedea Huntleigh 1042 Single Point, Aluminum lower-profile single-point load cell for platform weighing. This model is constructed of aluminum, and is a two-beam design. This design offers high immunity to side forces and is specially coated to provide humidity resistance. 1 to 100 kg. Complete with 10' of cable. Model 1042 is a low profile two-beam single point load cell designed for direct mounting of low cost weighing platforms, ideally suited for retail, bench and counting scales. 

Mounting screws are 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. These cells have a unique humidity resistant protective coating that assures long term stability even under harsh environment and extreme temperatures. 2 mv/v, 0.02% total error, 6 conductor cable, anodized aluminum. NTEP 96-132. Model 1042 is a low profile single-point load cell designed for direct mounting in weighing platforms. Its small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for retail, bench and counting scales. Capacities of 5 kg and above are supplied as standard in anodized aluminum.

This high accuracy load cell is approved to NTEP and other stringent approval standards, including OIML R60. A humidity resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. Similar to the Rice Lake Weighing Systems RL1042.

• Full Scale Output: 2.0 mV/V
• Input Resistance: 415 ± 15 ohms
• Output Resistance: 355 ± 3 ohms
• Material/Finish: Aluminum
• Temperature: Compensated 14° to 104° F / -10° to 40° C
• Operating -4° to 158° F / -20° to 70° C
• Safe Overload: 150% Full scale
• Rated Excitation: 10 VDC (15 V max)
• Combined Error: 0.02% Full scale
• Insulation Resistance: >2000 megohms
• Seal Type: Environmentally sealed - IP66
• Cable Length: 10 ft
• Approvals: NTEP FM Approved 

PART # ....... MODEL # ...... CAP (lbs) ............ CAP (kg)  
40680 ......... 1042-I-1 ........... 2 lb ...................... 1 kg
40681 ..........1042-I-3 ........... 6 lb ...................... 3 kg
40682 ..........1042-I-5 .......... 10 lb ..................... 5 kg
n/a ..............1042-I-7 .......... 15 lb ..................... 7 kg
40683 ..........1042-I-10 ........ 20 lb .................... 10 kg
40684 ..........1042-I-15 ........ 30 lb .................... 15 kg
40685 ..........1042-I-20 ........ 40 lb .................... 20 kg
40686 ..........1042-I-30 ........ 60 lb .................... 30 kg
40687 ..........1042-I-50 ....... 100 lb ................... 50 kg
40688 ..........1042-I-75 ....... 150 lb ................... 75 kg
40689 ..........1042-I-100 ..... 200 lb .................. 100 kg