Call: (919) 776-7737
The Cardinal Scale 225 Navigator weight indicator’s transflective display technology allows the 240 x 64-pixel (5-inch/127 mm W x 1.33-inch/34 mm H) back-lit LCD with 1-inch high characters to be viewed under any lighting conditions from direct sunlight to total darkness. With an optional dual scale input board, up to 3 scales with total weights can be viewed simultaneously.
Standard features include IP66 washdown stainless steel enclosure, 4 bi-directional RS232 serial ports, USB-B port, QWERTY keypad, 4 soft keys, 13 function keys, navigation keys, 16 Preset Weight Comparators (PWCs), 8 input control lines, 16 output control lines, piece count, batching, electronic tally roll, and 200 ID database for truck storage. NTEP legal-for-trade and OIML certified. Supports up to 14 350-ohm load cells.
Power Requirements: 100 to 240 VAC (50/60 Hz) at 0.4A Max.
Enclosure Type: Stainless steel wall or desk-mount
Enclosure Size: 10.8 in W x 3.2 in D x 8.3 in H
Operating Temperature: 14º to 104º F (-10º to +40º C)
Display: 240 x 64 pixel (5 in W x 1.33 in H / 127 mm W x 34 mm H) monochrome graphics LCD with white LED backlight
Annunciators: Zero, ID, mem, stable, accum, max, over, under, accept, 16 preset weight comparators
Keypad: 60 key color-coded keypad with QWERTY keys plus four soft keys and 13 function keys
Transducer Excitation: 12 VDC
Signal Input Range: 1.0 mV min. to 40 mV max. (with dead load boost)
Scales: 1 each standard, 3 each with optional 225-DS dual scale input board
Number of Load Cells: 14 each, 350 OHM minimum resistance
Load Cell Cable Length: 1,500 feet maximum with sense lines - 30 feet maximum without sense lines
Tare Capacity: Six digits (999,999)
Sample Rate: 1 to 100 samples per second, selectable
Auto Zero Range: 0.5 or 1 through 9 divisions
Weighing Units: Tons, Pounds, Ounces, Tonnes (Metric Tons), Kilograms, Grams, Custom
Standard I/O: 4 each serial I/O ports configured as: 3 each bi-directional RS-232 ports or 2 each 20mA output-only ports, 1 each USB-B port, 1 each bi-directional 20mA port, 8 each remote isolated inputs, and 16 each remote isolated outputs
MODEL # ........ DESCRIPTION
225 ................. Weight Indicator, Graphic LCD, 60 Key, Stainless Steel
225D ............... Weight Indicator, Graphic LCD with Digital Load Cell interface
225ICANP ........ Weight Indicator, Graphic LCD, 60 Key, Stainless Steel, iCanP
225ICANG ........ Weight Indicator, Digital, Graphic LCD, iCanG, NEMA4X
225 Options
225-DS Option: 225 Dual Scale Card
225-PANEL Option: 225 Panel Mount Kit
225-SNAP Weight Indicator, 225, SnapStream
225CANG Option: 225 Can Bus Interface, Fiber Optic, Glass
225CANP Option: 225 Can Bus Interface, Fiber Optic, Plastic
2XX-DAC Option: 2XX Analog Output Card
2XX-EIP Option: 2XX Anybus-S Ethernet/IP
2XX-IP Option: 2XX Ethernet Interface
2XX-MODBUSTCP Option: 2XX Modbus TCP/IP 2XX-OU Option: Over/Under Light Bar, 210/215/225 Indicators
2XX-RS232 Option: 2XX Serial Card
2XX-SFG Option: 2XX Serial Fiber Optic, Glass
2XX-SFP Option: 2XX Serial Fiber Optic, Plastic
2XX-USBA Option: USB-A Card, 2 USB-A Ports , One Micro SD Port
6600-0623 Modem, Short Haul
6600-2006 External waterproof connector port, USBA male to USBA female cable 1.6 ft/.5 m long & waterproof cap
DCPOWER DC Power Adapter
RB3 Relay Box, 3 Relays, Normally Open, 4 -15 VDC In, 20-280 VAC Out
RB4-ACIN Relay Box, 4 Relays, Normally Open, 115VAC In
RB4-ACINV Relay Box, 4 Relays, Normally Open, 230 VAC In
RB4-ACOUT Relay Box, 4 Relays, Normally Open, 3A, 24-280 VAC Out
RB4-DCIN Relay Box, 4 Relays, Normally Open, 3.3 - 32 VDC In
RB4-DCOUT Relay Box, 4 Relays, Normally Open, 3 - 60 VDC Out
RB8-ACIN Relay Box, 8 Relays, Normally Open, 115 VAC In
RB8-ACINV Relay Box, 8 Relays, Normally Open, 230 VAC In
RB8-ACOUT Relay Box, 8 Relays, Normally Open,
RB8-OPTO Relay Box, 8 Sockets for Optional Relay Modules
RB9 Relay Box, 9 Relays, Normally Open, 4 -15 VDC In, 20-280 VAC Out
RF1 Transceiver, Wireless, Short Range, Pair
S2E1 Option: Converter, Serial to Ethernet
SFG1 Option: Serial, Fiber Optic Transceiver, Glass
SFP1 Option: Serial, Fiber Optic Transceiver, Plastic
225 Replacement Parts
6013-0433 Nut #10-32 Hex Acorn, Stainless Steel SS
6610-2248 CONN GLAND .187-.312 GRIP .599 MTG BLK -UL APPROVED
6800-1032 Power Supply, Universal In, 15 VDC / 1.4 A
6980-1030 Power Cord, 6.3'
8200-B026-08 Nut: #10-32 Hex Acorn, Drilled, Stainless Steel
8200-B309-08 Gasket: 225 Indicator
8200-D160-0A PCB: Controller, 225, USA
8200-D160-2a PCB: Controller, 225, SCD, USA
8200-D160-3A PCB: Controller, 225, SNAP, USA
8200-D160-6A PCB: Controller, 225, iCan, USA
8200-D360-08 Keypad: 225 Indicator
8200-X319-0A Gimbal Kit: 225 Indicator
220 Parts
8200-D302-08 KEYPAD
8200-D319-0A GIMBAL
8200-D300-0A PC BOARD ASSEMBLY
8539-B254-0A CABLE ASSEMBLY
