Call: (919) 776-7737
The ProDec low profile powder paint finish floor scale was designed as a low profile, economical scale for use in many environments. Capacities from 2,000 to 20,000 lbs and sizes from 30" x 30" to 96" x 72" available. Custom Sizes available as well. Prodec Specification Brochure (pdf file)
Low profile design
The low profile design helps relieve the back strain of repetitive weighing. The scale height is only 3.31 inches on models of 5,000 lb or less, 4.06 inches on 10,000 lb models and 5 inches on 20,000 lb models. This allows for easy-on and easy-off manipulation of carts.
Built to last
Steel support channels welded under the top plate add superior strength and keep decks from warping and bending.
Safety tread deck
The top plate on the deck and ramp surfaces is a safety tread pattern. This non-slip pattern reduces the risk of injuries.
Four-way ramps
ProDecs are placed in the most efficient traffic patterns to utilize more than one weighing situation. The four-way ramp positioning speeds up work flow from any direction.
Patented Weigh Bars
Weigh Bars are another key to the ProDec's popularity. The patented Weigh Bar is made from an aircraft alloy steel bar and is precision tooled in the machine shop at Weigh-Tronix. An in-house gauging process, sealing procedure and testing analysis of each Weigh Bar insures the reliability you get in every ProDec scale.
Protected internal components
The moisture proof junction box is recessed in the deck with a removable plate for easy access. High pressure washdown will not affect the junction box or Weigh Bar weight sensors. All Weigh Bar cables are protected inside the deck structure. Cables cannot get damaged.
Serviceable
Design features on the ProDec offer easy access to Weigh Bars and the junction box for servicing. The removeable deck plate seals the recessed junction box and lifts off for quick, routine calibration procedures.
Portable
The ProDec is easy to move. Eye bolts inserted in the pre-fabricated lifting holes enable smooth relocation.
Adjustable feet
Adjustable leveling feet have a 3/4" adjustment and are made of a corrosion resistant stainless steel.
Using Weigh Bar technology for outstanding accuracy
The ProDec uses exclusive Weigh Bar weight sensors for accuracy and reliability. The Weigh Bar’s unique design and solid steel milling protects the electronics, allowing greater weighing accuracy without reducing the strength. The Weigh Bar is less prone to damage from impact and vibration, with a lower failure rate than conventional load cells.
Robust across a range of weighing capacities
It has up to 200% end loading protection and is available in 5,000lbs, 10,000lbs and 20,000lbs capacities.
PAINTED STEEL PRODEC FLOOR SCALE
Includes: High grade powder paint finish tread plate deck, high grade powder paint finish weight sensors, built-in easy top access, gasketed junction box, 25' interface cable and 4 Avery Weigh-Tronix Weigh Bars® that have been designed to allow a wider range of legal for trade floor scale capacities to accurately be achieved from a single weigh bar capacity. Legal-for-Trade CC 90-132 Class III 5000 Divisions. Large floor scale sizes also available, see below.
5,000 lb decks may be legally installed as a 2,000 lb capacity scale with 0.5 lb increments.
PART # .................................... MODEL ................. PLATFORM .................. SHIP WT.......
AWT05-505861 .................... DSL3030-05 .................. 30" x 30" ...................... 176 lbs
AWT05-505862..................... DSL3636-05 ................... 36" x 36" ...................... 223 lbs
AWT05-505863 ................... DSL4848-05 ................... 48" x 48" ...................... 338 lbs
AWT05-505864 ................... DSL6048-05 ................... 60" x 48" ...................... 391 lbs
AWT05-505865 ................... DSL7248-05 ................... 72" x 48" ...................... 456 lbs
AWT05-505866 ................... DSL9648-05 ................... 96" x 48" ...................... 510 lbs
AWT05-505867.................... DSL6060-05 ................... 60" x 60" ...................... 484 lbs
Capacity: 5,000 lb to 10,000 lb (2,500 kg to 5,000 kg)
10,000 lb decks may be legally installed as a 5,000 lb capacity scale with 1 lb increments. When used as a 5,000 lb scale, 10,000 lb ramps, pit frames and accessories are required.
AWT05-505868 ................. DSL4848-10 ................... 48" x 48" ....................... 491 lbs
AWT05-505869 ................. DSL6048-10 ................... 60" x 48" ....................... 566 lbs
AWT05-505870 ................. DSL7248-10 ................... 72" x 48" ....................... 641 lbs
AWT05-505871 ................. DSL9648-10 ................... 96" x 48" ....................... 797 lbs
AWT05-505872 ................. DSL6060-10 ................... 60" x 60" ....................... 679 lbs
AWT05-505873 ................. DSL7260-10 ................... 72" x 60" ....................... 772 lbs
AWT05-505874 ................. DSL8460-10 ................... 84" x 60" ....................... 910 lbs
AWT05-505875 ................. DSL7272-10 ................... 72" x 72" ....................... 959 lbs
AWT05-505876 ................. DSL8472-10 ................... 84" x 72" ....................... 1,027 lbs
AWT05-505877 ................. DSL9672-10 ................... 96" x 72" ....................... 1,133 lbs
Capacity: 10,000 lb to 20,000 lb (5,000 kg to 10,000 kg)
20,000 lb decks may be legally installed as a 10,000 lb capacity scale with 2 lb increments. When used as a 10,000 lb scale, 20,000 lb ramps, pit frames and accessories are required.
AWT05-505878 .................. DSL6060-20 .................. 60" x 60" ....................... 850 lbs
AWT05-505879................... DSL8460-20 .................. 84" x 60 " ...................... 1140 lbs
AWT05-505880 .................. DSL9672-20 .................. 96" x 72" ....................... 1420 lbs
Options
Ramps (5000 lb)
27885-0078 .............. 30" Ramp
27885-0011 .............. 36" Ramp
27885-0029 .............. 48" Ramp
27885-0037 .............. 60" Ramp
27885-0045 .............. 72" Ramp
27885-0060 .............. 96" Ramp
48419-0012 .............. 30" Ramp
48419-0020 .............. 36" Ramp
48419-0038 .............. 48" Ramp
48419-0046 .............. 60" Ramp
48419-0053 .............. 72" Ramp
48419-0079 .............. 96" Ramp
Ramps (10,000 lb)
27988-0017 ............... 48" Ramp
27988-0025 ............... 60" Ramp
27988-0033 ............... 72" Ramp
27988-0041 ............... 84" Ramp
27988-0058 ............... 96" Ramp
Ramps (20,000 lb)
49042-0023 ............... 60" Ramp
49042-0031 ............... 72" Ramp
49042-0049 ............... 84" Ramp
49042-0056 ............... 96" Ramp
15923-0325* ................. Platform lifting eye (must be requested at time of order)
27877-0011MTS ......... Straight ramp attachment bracket (5,000 lb)
27877-0029 ................. Right angle ramp attachment bracket (5,000 lb)
27874-0022 ................. Bolt down floor plate (5,000 lb)
28000-0019 ................. Straight ramp attachment bracket (10,000 lb)
28000-0027 ................. Right angle ramp attachment bracket (10,000 lb)
27999-0022 ................. Bolt down floor plate (10,000 lb)
49025-0016 ................. Straight ramp attachment bracket (20,000 lb)
49025-0024 ................. Right angle ramp attachment bracket (20,000 lb)
49022-0027 ................. Bolt-down floor plate (20,000 lb)
AWT05-507868 ........... Forklift Frame - For 48" x 48" 5000 lb or 10,000 lb Mild Steel
* Note: On all decks with a width dimension of less than 60", two (2) lifting eyes may be ordered at no additional charge. Decks with a width dimension of 60" or more may be ordered with four (4) lifting eyes at no additional charge.
